Phụ kiện cho kiểm tra siêu âm

ECHOTRACE – Gel tiếp âm cho kiểm tra bằng siêu âm
Gel tiếp âm là một loại gel thơm dựa trên nước, và tốt hơn dầu, mỡ hoặc nước: Nó đạt được sự tiếp âm tuyệt vời, không lẫn đất, và không có lưu huỳnh, halogen và phốt pho; Nó chứa chất ức chế ăn mòn, không gây kích ứng và không bắt lửa. Dãy nhiệt hoạt động: 0 °C through +80 °C
Mã đặt hàng:

  • Tube 0.1 l: 9000.004
  • Bottle 0.5 l: 9000.003
  • Bucket 3 l: 9000.001
  • Cubitainer 5 l: 9000.002
  • Barrel 200 l: 9000.006
ECHOTRACE – Gel tiếp âm chịu nhiệt cao cho kiểm tra siêu âm
Gel tiếp âm chịu nhiệt cao dựa trên sillicon oil, cho phép đo đạc ở bề mặt có nhiệt độ từ – 40 °C đến +290 °C.

Mã đặt hàng:

  • Tube 100 g: 9000.005
ECHOFLUID – Couplant for Manual Ultrasonic Testing
ECHOFLUID is an odourless liquid with a viscosity similar to water or oil, but grants better coupling than other liquids. ECHOFLUID is recommended for higher frequencies and wall thickness measurement. It is completely removable, an excellent corrosion inhibitor and non-irritating to skin.

Order numbers:

  • Bottle 0.1 l: 9004.001
  • Bottle 1 l: 9004.002
  • Can 10 l: 9004.003
  • Barrel 200 l: 9004.005
ECHOKOR – Corrosion Inhibitor
Indispensable for manual or automated ultrasonic testing in immersion or squirter techniques::

ECHOKOR – Water Additive: Water is an ideal couplant, but generates corrosion on components and testing mechanics. Common corrosion inhibitor very often remarkably reduce the tool life of ultrasonic probes. ECHOKOR is added to the water in 1 to 2.5 % per volume and thus reliably protects even materials sensitive to corrosion. ECHOKOR can easily be dissolved in water and bothers neither skin nor probes..

Order numbers:

  • Bottle 1 l: 9027.001
  • Can 5 l: 9027.002
  • Barrel 200 l: 9027.003

ECHOKOR LF – Water Additive is an extra low foam corrosion inhibitor and is convenient for the use in couplant circuits.

Order numbers:

  • Can 5 l: 9028.002
  • Barrel 200 l: 9028.003

Calibration Block #1


Calibration Block #2

(images not scaled)

Calibration Blocks – Indispensable for instrument calibration and certification:

– Calibration Block #1 according to EN ISO 2400,
– Calibration Block #2 according to DIN EN ISO 7963.

With these calibration blocks, also many exercises for learning ultrasonic testing technique can be solved. The calibration blocks are delivered for protection together with a sturdy wooden storing case resp. in a leather pouch.

Order numbers:

  • Calibration Block #1: 1703.001
  • Calibration Block #2: 1702.001
Step Wedge

Useful auxiliary device for adjustment and check-up of wall thickness gauges:

Step Wedge 2 – 25 mm
Steps: 2, 4, 8, 12, 16, 25 mm +/- 0.05 mm
Contact area per step: 20 mm x 20 mm

Step Wedge 2 – 10 mm
Steps: 2, 5, 10 mm +/- 0.05 mm
Contact area per step: 15 mm x 25 mm

Order numbers:

  • Step Wedge 2 to 25 mm: 1713.001
  • Step Wedge 2 to 10 mm: 1713.002
Adjusting Standards

Useful auxiliary device for the daily check-up of the test range adjustment of your ultrasonic instrument or to check linearity and sensitivity:

The adjusting standard is equipped with a Lemo 1 – plug and is connected like a one-crystal probe to the transmitter socket of any arbitrary ultrasonic flaw detector. An echo sequence of 10 consecutive back wall echoes (50 mm steel with cL = 5920 m/s) is typically used for instrument calibration. Also available with 100 mm steel.

Order numbers:

  • Adjusting Standard (50 mm echo sequence): 1842.001
  • Adjusting Standard (100 mm echo sequence): 1842.002
Nếu bạn quan tâm đến sản phẩm này, xin vui lòng liên hệ với chúng tôi!

Sản phẩm tương tự